Iron door, as we know, is widely chosen for our home or office decoration. It takes an importance and  reflects the character of a home or office and introduces everything that stands behind it. Therefore, to choose an excellent iron door is a key point. 

1, Check the materials used

The materials used for high-quality wrought iron doors, thickness, strength and oxide film shall comply with the relevant national standards. The thick wall shall be above 1.2mm, the tensile strength shall be 157N/mm2, and the flexible strength shall be 108N/mm2. If one iron door cannot meet these basic standards, they are inferior products and cannot be used.

2, Check the processing

High-quality wrought iron door, fine processing, exquisite installation, good sealing performance, and easy to switch. Inferior wrought iron gates,select materials and specifications randomly to process roughly, sawing instead of milling and not installed as required, so the door would be with poor sealing performance, uncomfortable switch. When there is strong wind and external force, it is easily to scrape or damage the sliding part, there would be a destroy and injury.

3, Check the price

Under normal circumstances, high-quality wrought iron doors are much more expensive due to higher production costs than inferior wrought iron doors.

The wrought iron doors designs are various and can be designed as per your preference. It is a good choice to install a unique wrought iron door at a distinguishing style you are expecting, home100 has many single and double doors for your selection, and we accept custom order, contact us now if you are looking for a door.

Iron door brings a beautiful and distinct style to our home or office decoration, so now it is a very popular selection. As followings we would like to share some solutions on how to touch up an iron door when it is needed.

The 1st. Step: Use 1000CW fine paper to polish.Just polish the part where paint is removed.

The 2nd. Step: Touch the primer paint (The black paint)

Two bottles of extra paint are attached for every door, the black paint is the bottle which has more quantity and heavier.

After finding the black paint bottle, then pour out the paint in a cardboard, use the soft brush (wool brush is the best) to stir it well. Then touch the place where needed repairing.

Note: No need to pour out too much paint. Just a little bit.

The 3rd. Step: Touch the surface color

After finish the primer touching up, wait for about 20 minutes to ensure the black paint is dry enough, then use another cardboard and clean soft brush to touch up the surface color.

The surface color bottle is another bottle which has less quantity.

Note: No need to pour out too much paint. Just a little bit.

After finishing 3 steps above, if you find the paint you touch is bad, then

you can polish the surface with the fine sand paper to remove the color,

then repeat the 2nd step and the 3rd step.

Any question or any we could do for you, please do not hesitate to contact us, thank you.